teaching

Professor, Cairo University, Mechanical Design & Production Engineering Dept., Cairo University, Giza 12613, Egypt.

contacts
Ahmed Ali Ahmed El-Zoghby - Professor, Cairo University, Mechanical Design & Production Dept., Faculty of Engineering, Cairo University, Giza 12613, Egypt

 

 

 

 

Publications

 

  1. 1977:
    Shawki, G.S.A., Metwalli, S.M. and El-Zoghby, A.A., ”Optimum Design of Uniform-Section Disk Springs Under Various Constraints,” ASME Winter Annual Meeting, Atlanta, Georgia, U.S.A., 77-Wa/DE-22, November 27-December 2, 1977. 
     
  2. 1979:
    Younan, M.Y.A. and El-Zoghby, A.A., ”Discussion on the Application of the Method of Sections for Determining the Stress-Intensity Factors,” Trans. of the 5th Int. SMiRT Conf., Berlin, W. Germany, B2, August 17-21, 1979, pp. 117-124.
     
  3. 1979:
    Younan, M.Y.A. and El-Zoghby, A.A., ”Application of Finite Element Method to the Fracture Mechanics of Pressurized PVC Pipes,” Current Advances in Mechanical Design and Production I, Pergamon Press, 1980, pp. 213-220, (Proceedings of the 1st Cairo University MDP Conf., Cairo, Egypt, December 27-29, 1979).  
     
  4. 1980:
    Shawki, G.S.A., Metwalli, S.M. and El-Zoghby, A.A., “Optimization of Radially-Tapered Disk Springs,” Current Advances in Mechanical Design and Production I, Pergamon Press, 1980, pp. 21-32, (Proceedings of the 1st Cairo University MDP Conf., Cairo,Egypt,December 27-29, 1979).
     
  5. 1980:
    El-Zoghby, A.A., Metwalli, S.M. and Shawki, G.S.A., “Linearized Ridge-Path Method for Function Minimization,” Journal of Optimization Theory and Applications (JOTA), Vol. 30, No. 2, February 1980, pp. 161-179. 
     
  6. 1981:
    Bayoumi, S.E., Eleiche, A.M. and El-Zoghby, A.A., “A Tensile Testing Machine for Polymeric Materials,” Scientific Engineering Bulletin (SEB), Faculty of Engineering, Cairo University, Giza, Egypt, Vol. 2, 1981, 37-45.
     
  7. 1981:
    El-Zoghby, A.A. and Younan, M.Y.A., “Comparison Between Fracture Mechanics Specimens from Pipes,” Trans. of the 6th Int. SMiRT Conf., Paris, France, Vol. F, F7/7, August 17-21, 1981.
     
  8. 1982:
    El-Zoghby, A.A. and Younan, M.Y.A., “Fracture Toughness Evaluation of PVC Pipes,” Current Advances in Mechanical Design and Production, Dept. of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt, Vol. I, 1982, pp. 145-152, (Proceedings of the 2nd Cairo University MDP Conf., Cairo, Egypt, December 27-29, 1982). 
     
  9. 1983:
    El-Zoghby, A.A., Younan, M.Y.A., and Metwalli, S.M., “Fracture Mechanics Analysis of a Fire Tube Boiler,” Journal of Engineering Fracture Mechanics, Vol. 17, No. 4, 1983, pp. 335-48.
     
  10. 1983:
    El-Zoghby, A.A. and Younan, M.Y.A., “ Effect of Loading System Compliance on the Fracture Toughness of PVC,” Trans. of the 2nd Alexandria University Int. Conf. on Production Engineering, Design and Control (PEDAC), Alexandria, Egypt, Vol. II, MAT-7, December 27-29, 1983, pp. 1188-1193. 
     
  11. 1985:
    Ragab, A.R. and El-Zoghby, A.A., “Evaluation of the Mechanical Behavior of Plain and Spirally-Stiffened Polyvinylchloride Pipes,” ASTM Journal of Testing and Evaluation (JTEVA). Vol. 13, No. 2, March 1985, pp. 137-142.
     
  12. 1988:
    Ahmed, F.S. and El-Zoghby, A.A., “ Fracture Toughness of Nodular and Vermicular Cast Iron,” The Egyptian Foundry men’s Society Magazine (AL-SEBAKA), Vol. 39, September 1988, pp. 31-35. 
     
  13. 1988:
    Younan, M.Y.A., El-Zoghby, A.A. and Mohamed, A.F.T., “ A Thick-Walled Cylindrical Fracture Toughness Specimen,” Current Advances in Mechanical Design and Production IV, Pergamon Press, 1988, pp. 243-250, (Proceedings of the 4th Cairo University MDP Conf., Cairo, Egypt, December 27-29, 1988).
     
  14. 1988:
    El-Zoghby, A.A. and Karmowski, W., “ A Crack-Initiation Strain Approach for Fracture Toughness Estimation of Polymers,” Current Advances in Mechanical Design and Production, Dept. of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt, Vol. II, 1988, pp. 211-218, (Proceedings of the 4th Cairo University MDP Conf., Cairo, Egypt, December 27-29, 1988). 
     
  15. 1989:
    El-Zoghby, A.A., “ Analysis of a Wedge Loaded Centrally Cracked Plate,” Proceedings of the 4th Int. MET-4 Conf. on Mechanical Engineering and Technology, Cairo, Egypt, March 21-23, 1989, Organized by Zagazig University (Egypt), and Leicester Polytechnic (England). 
     
  16. 1989:
    El-Zoghby, A.A., “ Determination of Exact Stress-Intensity Factors Using the Method of Sections,” Proceedings of the Egitrib 1st Tribology Conf., Cairo, Egypt, December 20-21, 1989. 
     
  17. 1989:
    Kouta, F.H., Shash, Y.M., El-Zoghby, A.A. and Mahmoud, M.K., “ Effect of Cold Prestraining and Annealing on the Mechanical Properties of Vanadium High Strength Low Alloy Steel,” Current Advances in Mechanical Design and Production, Dept. of Mechanical Design and Production, Faculty of Engineering, Cairo University, Giza, Egypt, Vol. I, 1991, pp. 82-92, (Proceedings of the 5th Cairo University MDP Conf., Cairo, Egypt, December 28-30, 1991). 
     
  18. 1992:
    Kouta, F.H., Shash, Y.M., El-Zoghby, A.A. and Mahmoud, M.K., “ Effect of Hot Prestraining on the Mechanical Properties of Vanadium High Strength Low Alloy Steel,” Proceedings of the 5th Machine Design and Production Conf. (METU),Ankara, Turkey, September 16-18, 1992.
     
  19. 1993:
    Shalaby, H.M., Bakir, N.G., El-Zoghby, A.A. and Abu Tabl, Z.M., “ Fracture Toughness, KIC , of Some Posterior Composites and Dental Amalgams: Compositional Considerations,” The New Egyptian Journal of Medicine, Vol. 9, No. 1, July 1, 1993, pp. 133-138.
     
  20. 1998:
    Khattab, A.A. and El-Zoghby, A.A., “ Effect of Recycling on the Mechanical Properties of Low Density Polyethylene,” Journal of Engineering and Applied Science, Faculty of Engineering, Cairo University, Giza, Egypt, Vol. 45, No. 4, August 1998, pp. 533-547.
     
  21. 2000:
    El-Zoghby, A.A. and Al-Bastaki, N.M., “Application of Elastic-Plastic Fracture Mechanics Criteria to Specimens Cut From Plastic Pipes,” Current Advances in Mechanical Design and Production VII, Pergamon Press, 2000, pp. 243-252, (Proceedings of the 7th Cairo University MDP Conf., Cairo, Egypt, February 15-17, 2000).
     
  22. 2000:
    Khalil, M. Bakhiet, E. and El-Zoghby,A., “ On Simultaneous Failure of Cross-Ply and Angle-Ply Composite Laminates,”  Current Advances in Mechanical Design and Production VII, Pergamon Press, 2000, pp. 281-292, (Proceedings of the 7th Cairo University MDP Conf., Cairo, Egypt, February 15-17, 2000).  
     
  23. 2001:
    Khalil, M., Bakhiet, E. and El-Zoghby, A., “Optimum Design of Laminated Composites Subjected to Hygrothermal Residual Stresses,” Proceedings of the Institution of Mechanical Engineers, Vol. 215 Part L, No. L00500, 2001, pp.175-186.
     
  24. 2006:
    El-Zoghby, A.A., Khattab, A.A., Shokry, K.M. and Mahmoud, M.K., "Effect of Temperature on the Mechanical Properties of Unidirectional Glass/Epoxy Composites," Int. Journal of Mechanics and Solids, Vol. 1, No. 1  2006, pp. 41-51.
     
  25. 2008:
    El-Zoghby, A.A. and Ibrahim, O., "Influence of Sulphur on the Toughness of the 20MnMoNi55 Bainitic Steel," Proceedings of the 9th Cairo University MDP Conf., Cairo, Egypt, January 8-10, 2008, pp. 1019-1027.
     
  26. 2008:
    El-Zoghby, A.A., "Crack Initiation Direction in Pipes under Torsion and Internal Pressure," Proceedings of the 9th Cairo University MDP Conf., Cairo, Egypt, January 8-10, 2008, pp. 1723-1732.
     
  27. 2008:
    El-Zoghby, A.A., "Abrasion Resistance of Polyester Reinforced by Natural Fibers" Proceedings of the 9th Cairo University MDP Conf., Cairo, Egypt, January 8-10, 2008, pp. 1104-1114.
     
  28. 2010:
    El-Hossainy, T.M.,El-Zoghby,A.A.,Badr, M.A.,Maalawi,K.Y.and .Nasr,M.F.(2010) "Cutting Parameter Optimization when Machining Different Materials", Materials and Manufacturing Processes, 25: 10, 1101-1114.
     
  29. 2015:
    Nasr, M.F.,El-Zoghby,A.A.Maalawi,K.y.Azzam,B.S.and Badr, M.A.(2015) "Torsional Buckling Optimization of Composite Drive Shafts", 33 (3):517-524.
 
Powerd by MisrPro Solutions
contacts